IR Source Selection
27. Press the Source button on the KP6 until source 1 is selected.
28. Press the "on" button in the CA-LCD section of the CA-LRC1 remote.
On
Off
CA-LRC1
29. Only the CA-LCD2 connected to IR source 1 and Com IR will illuminate.
30. Press the "off" button in the CA-LCD section of the CA-LRC1 remote.
31. The CA-LCD2 number 1 and Com IR keypad will go dark.
CAA66 Test Procedure
Revised July 22, 2005
17 of 44