Russound CAA66 Installation Manual page 67

4. Connect the 7 – CA-LCD2's modified with 845.1 emitters to the IR source selection
ports shown below.
It may be helpful to label each keypad with the IR source number.
1
Electrical tape covers each keypad to keep IR from bleeding from one keypad to another.
Look at picture on page 44 for example of CA-LCD2 keypad.
5. Plug the CA-LCD2 test fixture into the AC outlet.
All CA-LCD2 keypads should be off at this point.
You could use the CA-LRC-1 to shut off each keypad.
Point the CA-LRC1 at the CA-LCD2 window and press the off button.
On
2 3 4
Off
CA-LRC1
CAA66 Test Procedure
Revised July 22, 2005
14 of 44
5 6 Com IR