Russound CAA66 Installation Manual page 94

25. Set the Zone 2 Fixed/Variable switch on the CAA66 to Fixed.
Fixed/Variable Switch
26. Press the on/off button on the KP6.
27. Press the Source button on the KP6 until Source 1 is selected.
28. Sound should be heard from the speakers and can't be adjusted from the CAA66.
29. If sound is too loud adjust the Right and Left Gain on the R235LS for a moderate
level.
30. Set the Fixed/Variable switch on the CAA66 to Variable.
31. Press the Volume Up button on the KP6.
32. Volume should increase.
33. Press the Volume Down button on the KP6.
34. Volume should decrease.
35. Turn off the CAA66 by pressing the Power button on the Front Panel.
36. All CAA66 Front Panel LED's should be dark.
37. Remove the 110VAC power cord from the rear of the CAA66.
CAA66 Test Procedure
Revised July 22, 2005
41 of 44