Russound CAA66 Installation Manual page 54

CAA66 Test Procedure
The purpose of this Test Procedure is to instruct both the Russound
Test Department and outside Service Technicians
.
Equipment Needed:
CD player or a Line Level Audio Source
Speakers
12Volt LED Indicator (1/8 inch jack, LED, 1K resistor)
7 – CA-LCD2 modified to be used as and IR selection device
R235LS Amplifier
KP6
RS232 Cable
CAA66 Manual
KP6 Manual
AX-6
CA-LRC1 remote control
SRC1 remote control
12V power pack with 1/8" mini jack attached (positive tip)
Inspection:
Inspect Sheet Metal for scratches.
Inspect screening of controller for correct labeling.
Inspect packaging and it contents.
CAA66 Test Procedure
Revised July 22, 2005
1 of 44