Russound CAA66 Installation Manual page 95

240VAC Test
All tests prior to the 240VAC section were performed using 110VAC.
1. Set the AC110V / AC240V switch to AC240V located on the rear of the CAA66.
2. Connect a 240 VAC source to the rear of the CAA66.
3. Press the Power button on the Front Panel of the CAA66.
4. Press the on/off button on the KP6.
5. Press the Volume up button on the KP6.
6. Volume should increase.
7. Press the Volume down button the KP6.
8. Volume should decrease.
9. Turn off the CAA66 by pressing the Power button on the Front Panel.
10. Remove the 240 VAC power cord.
11. Set the AC110V / AC240V switch to AC110V located on the rear of the CAA66.
CAA66 Test Procedure
Revised July 22, 2005
42 of 44
AC110V / AC240V switch
AC110V / AC240V switch