Russound CAA66 Installation Manual page 68

6. Check the AX-6 is set to position 1.
Picture is shown in
position 3. Set to
correct position
7. Press play on the CD player and play any song.
8. Press the volume up button on the KP6 and increase the volume to a moderate
level.
***Listen to each speaker to be sure sound is equal and not distorted.
Do this for every source by continuing the procedure****
Volume Up
Volume Down
9. Press the Source button on the KP6 to select source 2.
No sound should be heard from the speakers.
10. Set the AX-6 to position 2.
Sound is now heard from the speakers.
11. Press the Source button on the KP6 to select source 3.
12. No sound should be heard from the speakers.
13. Set the AX-6 to position 3.
CAA66 Test Procedure
Revised July 22, 2005
15 of 44
Source button