User Information - Docomo F-08B Instruction Manual

Before Using
Turning power ON - Configuring default setting
Perform the following operations after turning the power ON for
the first time.
a f (2 sec. or more)
b
On a confirmation screen of enlarged
menu setting, "Yes" or
The screen shown to the right appears.
c
Set required itemseC [Complete]
Always set Terminal security code. If you
exit without setting, Initial setting screen
reappears when the power is turned ON the
next time.
d
On a confirmation screen of software
update function, g
The stand-by display appears.
Point
･
If no operation is performed, the display light is turned off automatically
according to the settings in Light time-out or eco mode. The display light
turns on again if there is any operation or incoming call.
Turning power off : f (2 sec. or more)
Changing the initial setting : mehgdg
Changing screen display to English : mehbfceSelect "English"
"No"
<Initial setting screen>
Before Using

User information

Check your own phone number.
For details of checking/changing a mail address, refer to "Mobile
Phone User's Guide [i-mode] FOMA version".
a me0 User information
The screen shown to the right appears.
Point
･
Besides your phone number and mail address, birthday, postal code/
address, company name, etc. can be saved in User information.
Editing user information : On User information edit screen,
AuthenticateeEditeC
Checking the user information during a call etc. : se0
<User information
screen>
Ce
23