Record Message - Docomo F-08B Instruction Manual

Call Telephone
When you cannot answer a call
Use an appropriate function according to a situation or place
where you cannot answer a call.

Record message

When Record message is set to "ON", a greeting message is played
and the caller can record message when you cannot answer the call.
a S (1 sec. or more)ea Record messageea ON
appears on the stand-by display.
Point
･
You can record up to 4 voice/videophone calls in total, approximately 30
seconds for each call. When reaching the savable number,
the stand-by display and Record message does not work. Delete
unnecessary recorded messages.
･
Even when Record message is not set to "ON", you can activate it only
once by pressing S for 1 second or more while receiving a call.
･
Even when the greeting message is being played or a message is being
recorded, a call can be answered by pressing n. For a videophone call,
you can also answer a call by pressing I. However, the message
before the call was answered is not recorded.
Playing a recorded message : S (1 sec. or more)ebeSelect a
messageeSelect whether to delete or not
Public mode
Public mode is an automatic answering service putting emphasis
on manners in a highly public place or when driving a car.
Information
･ When you cannot immediately answer a call, press f while receiving the call to put it on hold. When the call is put on hold, the other party hears a
status message. For a videophone call, the videophone on-hold image is displayed on the phone of the other party and yourself. 【
Public mode (Drive mode)
When there is an incoming call, an announcement is played to
inform the other party of the reason you cannot answer the call
and request to call back before the call ends.
a * (1 sec. or more)
appears on the stand-by display.
Point
･
In Public mode (Drive mode), no receiving action is performed, and calls
are recorded as Missed call.
Canceling : * (1 sec. or more)
appears on
Public mode (Power OFF)
When there is an incoming call while you are turning power off, an
announcement is played to inform the other party of the reason
you cannot answer the call and request to call back before the call
ends.
a
Enter "*25251"en
Even when Public mode (Power OFF) is set, no indicators such
as icons appear on the display.
Point
Canceling : Enter "*25250"en
Checking the settings : Enter "*25259"en
応答保留 (On hold)】
47