Docomo F-08B Instruction Manual page 141

Upper slot : Command
Lower slot : Example
*1
AT+CUSD=<n>,"<str>"
AT+CUSD=0,"012345678"
OK
*1
AT+FCLASS=<n>
AT+FCLASS=0
OK
AT+GCAP
AT+GCAP
+GCAP : +CGSM,+FCLASS,
+W
OK
AT+GMI
AT+GMI
FUJITSU
OK
AT+GMM
AT+GMM
FOMA F08B
OK
AT+GMR
AT+GMR
Ver1.00
OK
*1
AT+IFC=<n,m>
AT+IFC=2,2
OK
*1
AT+WS46=<n>
AT￥S
AT￥S
E1 Q0 V1 X4 &C1 &D2
&S0 ・・・ (snip) ・・・
S104=001
OK
*1
AT￥V<n>
AT￥V0
OK
+++
+++ (not displayed)
OK
*1 Registered in FOMA terminal by &W command.
*2 Not reset by &F and Z commands.
*3 When Z command is executed before the &W command, the terminal is reset to the last status registered in memory, and
prior changes are erased.
Set Additional service (Register USSD) of Network Services. Enter Service code provided
by DOCOMO in <str>.
n=0 : Not answer mid result (default)
n=1 : Answer mid result in "+CUSD : <m>, "<str>",0" format
m=0 : Information not requested m=1 : Information requested
AT+CUSD? : Display current settings AT+CUSD=? : Display a list of assignable values
Set communication type supported by FOMA terminal.
n=0 : Only data supported (fixed value)
AT+FCLASS? : Display current settings
AT+FCLASS=? : Display a list of assignable values
Display the range of AT commands supported by FOMA terminal in the "+GCAP : <n>"
format.
n=+CGSM : Support GSM commands (including the case for supporting a part)
n=+FCLASS : Support +FCLASS commands n=+W : Support +W commands
Display FOMA terminal manufacturer name.
Display model name of FOMA terminal.
Display FOMA terminal version.
Set how to control local flow between a PC and FOMA terminal.
n, m=0 : No flow control n, m=1 : Perform XON/XOFF flow control
n, m=2 : RS/CS (RTS/CTS) Perform flow control (default)
AT+IFC? : Display the current settings and status in the "+IFC : <n>,<m>" format (n is the
value of DCE by DTE, and m is the value of DTE by DCE)
AT+IFC=? : List of the settable values is displayed
Display wireless network used when sending communication in n number.
When entering AT+WS46=<n>, ERROR is returned because it cannot be changed.
n=22 : 3G network (FOMA) (default)
AT+WS46? : Display current settings AT+WS46=? : Display a list of assignable values
Display the currently set commands and S register settings.
Set whether to use expanded result codes when connection is made.
n=0 : Not use expanded result codes (default)
n=1 : Use expanded result codes
Move from online data mode to online command mode when entered during a
communication.
The escape guard interval is 1 second (fixed value).
Description
32