Data Management - Docomo F-08B Instruction Manual

Data Management

Using microSD card
You can save still images/moving pictures or melodies, or back up
data of phonebook, schedule, etc. in microSD card.
･ F-08B supports microSD card of up to 2 Gbytes, and microSDHC
card of up to 16 Gbytes (as of April, 2010). For information about
latest operation check results, refer to the following sites. Note
that information described is the result of operation
confirmation and does not guarantee all operations.
From i-mode : iMenu ⇒ メニューリスト
(Menu list) ⇒ ケータイ電話メーカー
(Mobile phone manufacturer) ⇒ メモ
リーカード対応情報 (Memory card
support information) (In Japanese
only)
From PC : FMWORLD (http://www.fmworld.net/) ⇒ 携帯電話
(Mobile phone) ⇒ microSD対応状況、microSDHC対応状況
(microSD/microSDHC support report) (In Japanese only)
* The access method may be changed without previous notice.
✜
Notes on using microSD card
･
Do not give strong impact such as dropping, to the FOMA terminal
with microSD card inserted. The data may be damaged.
･
The data saved to microSD card/microSDHC card from another device
such as a PC may not be displayed or played in FOMA terminal. Also,
the data saved to microSD card/microSDHC card from FOMA terminal
may not be displayed or played in another device.
･
Maintain a separate record of the data saved to the microSD card,
for example, by backing up on a PC. If the saved data is deleted or
altered, DOCOMO assumes no responsibility for the loss of any
data.
78
QR code for site
access
Installing
a
Turn FOMA terminal OFF
and remove the battery
pack
b
Insert the microSD card
slowly into the slot with
metal contacts side down
(as shown right), and insert
it further until it clicks
* To remove the microSD card, push it lightly to pop it out, and then pull
it out.
Formatting
Format microSD card with FOMA terminal before using.
a mef LifeKitec microSDeC
"Regular format"eAuthenticatee"Yes"
Point
･
You can minimize processing to format a formatted microSD card by
selecting "Quick format". Formatting microSD card deletes all the data in
the card.
Quick format : Format only data management area. It reduces formatting
time by executing minimum processing.
Regular format : Format both data management area and data area.
[Format]e