✜
What you can do with waterproofness of F-08B
You can talk or watch 1Seg programs without using an umbrella in
・
the rain (for rainfall of 20 mm or less per hour).
- When your hands or FOMA terminal are wet, avoid installing/
removing the back cover or opening/closing the external
connection jack cap.
You can also shoot still images and moving pictures in the pool
・
depth of 1.5 m.
- Do not perform other operations underwater than shooting still
images and moving pictures.
- If you put the terminal in water of swimming pool, be sure to have
it within 30 minutes.
- If FOMA terminal gets wet with water from the swimming pool,
wash it in after-mentioned procedure and drain the water as
predefined (⇒P18).
・
You can use FOMA terminal in a bathroom.
- Do not put the terminal in the bathtub. Do not use the terminal in
hot water. Doing so may cause malfunction.
- Never put FOMA terminal in hot spring water or water containing
soap, detergent or bath powder.
・
You can immerse FOMA terminal in static water of wash bowl and
wash dirt out with shaking the terminal.
- Install the back cover and with it locked, holding the external
connection jack cap not to open and wash it not using brush,
sponge, etc.
16
To ensure waterproofness
To avoid water ingress, be sure to observe the points below.
・
Do not throw any liquid other than room-temperature tap water on
FOMA terminal, or soak it in such liquid.
・
Open/close the external connection jack cap as described below.
<Opening the external connection jack cap>
Place your finger at groove on the hinge side to open the cap.
Groove on the hinge side
<Closing the external connection jack cap>
Close with the tab for the back cover at the rear side of the cap fitted
into the concave of this terminal. Make sure that the cap is
completely closed without slack.
Tab on the back
side cover
Need help?
Do you have a question about the F-08B and is the answer not in the manual?