Docomo F-08B Instruction Manual page 82

Data Management
Infrared communication/iC transmission
You can send/receive data to/from devices such as FOMA terminal
supporting infrared communication function or iC transmission
function. Check the locations of the other party's infrared port and
mark, and refer to the following images to establish connection.
Infrared
data port
15°
15°
Approx.
20 cm or less
Infrared communication
Point
･
When sending/receiving all data items, the sender and receiver need to determine
a 4-digit authentication password in advance. For infrared communication, the
receiver's terminal must be ready for communication first.
･
When sending/receiving all data items, the data saved in the receiver is
deleted, and the newly received data is saved. However, some data (data in
"Preinstalled" folder, etc) may not be deleted, or the saving locations, folder
names or the orders of data may be different from those in the sender.
･
While charging, sending data by iC transmission is unavailable.
Sending a phonebook entry via infrared
communication/iC transmission
a
Move the cursor to a phonebook entryemeh
Send via Ir/iCea Send Ir data
80 transmissione"Yes"
Face marks to
each other
*Approx.1 cm distant
or less
iC transmission
c iC
or
Sending all items via infrared communication/iC transmission
mef LifeKiteb Ir/iC/PC connectioneb Send all Ir
a
c Send all via iCeSelect an item
data or
eAuthenticateeEnter an authentication passworde"Yes"
Receiving an item via infrared communication
a mef LifeKiteb Ir/iC/PC connectionea
Receive Ir dataea Receivee"Yes"eSend data from
a sendereAfter receiving, "Yes"
Receiving an item via iC transmission
a
Send data item from a sendereWith the stand-by
display on a receiver, place
othereAfter receiving, "Yes"
Receiving all items via infrared communication
mef LifeKiteb Ir/iC/PC connectionea Receive
a
Ir dataeb Receive alleAuthenticateeEnter an
authentication passworde"Yes"eSend data from a
sendereAfter receiving, "Yes"
Receiving all items via iC transmission
a
Send data from a sendereWith the stand-by display
on a receiver, place
othereAuthenticateeEnter an authentication
passwordePlace the
eAfter receiving, "Yes"
marks close to each
marks close to each
marks close to each other