Setting Communications Without Using Docomo Connection Manager - Docomo F-08B Instruction Manual

Setting communications without using DOCOMO
Connection Manager
The method of dialup connection setup without DOCOMO Connection Manager is explained.
･
When using an access point compatible with HIGH-SPEED such as mopera for packet communication,
make settings using DOCOMO Connection Manager.
◆ Flow of dialup network setting
･
Flow of setup for data communication→P5
･
Before operating, make sure that a PC and FOMA terminal are properly connected.
・ When the access point is mopera U or mopera, you do not need to set.
* Set for packet communication.
Communication software to input AT commands is required for settings.
The method of setting using "ハイパーターミナル (Hyper terminal)" that comes with Windows XP is
explained here. Windows 7 and Windows Vista do not support "ハイパーターミナル (Hyper terminal)". For
Windows 7 and Windows Vista, set using the software supported by Each OS (Follow the method for the
software to be used.).
◆ Setting the dialup connection (APN)
❖
The dialup connection (APN) and registration number (cid)
The dialup connections (APN) for packet communication can be set for registration numbers (cid) between
1 and 10 in FOMA terminal. By default, "mopera.ne.jp" (APN) to connect to mopera is registered in cid1,
"mopera.net" (APN) to connect to mopera U is registered in cid2 and 3, and "mpr.ex-pkt.net" (APN) to
connect in 128K communication is registered in cid4. For connecting to other providers or corporate LANs,
register APN for cid5-10.
･
For the dialup connections (APN), inquire your provider or network administrator.
･
The dialup connection settings can be considered as phonebook entries registered for packet
communication. The comparison between dialup connection settings and FOMA terminal phonebook is
as shown below.
Connection (APN)
Registration number (cid)
Connection name (APN)
*99***<cid># (Packet communication)
･
The registered cid become the connection number in the dialup connection numbers setting.
Setting the dialup connection (APN)*→P16
Setting Show/Hide caller ID*→P18
・ Set as required.
Setting Dialup Network
・ Setting for Windows 7, Windows Vista→P19
・ Setting for Windows XP→P22
Registration number (Phonebook No.)
Party's name
Party's phone number
Phonebook items
16