Installation Of Fire; Unpacking The Fire; Installing The Fire Box - Flavel Windsor Installation, Maintenance & User Instructions

2.1

UNPACKING THE FIRE

Carefully lift the fire out of the carton. Remove the loose item packaging carefully
from the front of the appliance. Check the contents as listed :-
Packing check list - manual control models
1 off Fire box / burner assembly
1 off Boxed ceramic base and 7 synthetic coals
1 off Loose items bag inc guarantee card and cable fixing kit
1 off Installation / user book (combined)
1 off Efficiency baffle
1 off Pebble set (if ordered as an optional extra) pack 2 of 2
1 off Trim / Fret or Fascia (as applicable)
Packing check list - electronic flame control models
1 off Fire box / burner assembly
1 off Boxed ceramic base and 7 synthetic coals
1 off Loose items bag inc guarantee card, restrictor baffle, grommet & cable fixing kit
1 off Installation / user book (combined)
3 off 1.5V AA batteries (for control valve)
1 off Trim
1 off Fret & ashpan cover
1 off Pebble set (if ordered as an optional extra) pack 2 of 2
2.2

INSTALLING THE FIRE BOX

Establish which type of flue you are intending to install the fire in to :-
225 x 225mm (9 inch x 9 inch) brick built chimneys
175mm (7 inch) diameter lined brick or stone flue, insulated pre-fabricated
metal flue box to BS 715 / BS EN 1856-2 or Pre-Cast Flue to BS EN 1858
When installing into 125mm (5 inch) diameter lined brick or stone flue, or
insulated pre-fabricated metal flue box to B.S. 715 and pre-cast flues the
restrictor baffle must not be fitted.
A spillage test must always be carried out to check satisfactory
clearance of flue products, regardless of the type of flue the
appliance is being fitted to.
SECTION 2

INSTALLATION OF FIRE

11