Re-Asembling The Ceramics And Fuel Bed (Pebble Models) - Flavel Windsor Installation, Maintenance & User Instructions

5.9 RE-ASSEMBLING THE FUEL-BED - PEBBLE MODELS
5.9.1 Place the fuelbed base centrally on to the fuelbed support and push
fully backwards to the rear face of the fibre boards Make sure that the
fuelbed base is located centrally in the fire box, behind the
retaining tabs as shown below in figure 7.
Fig. 7
5.9.2 Position the front row of four large loose pebbles along behind the first
row of pebbles, ensuring that the flame paths as indicated are not
interupted. See figure 8 below.
Fig. 8
Beige pebbles
to be
positioned as
indicated
Position fuel-bed base behind
retaining tabs
43