Manual Operation Of Elecronic Fire Control Models - Flavel Windsor Installation, Maintenance & User Instructions

5.4 MANUAL OPERATION OF ELECTRONIC FLAME CONTROL
MODELS
5.4.1 These products can be operated manually should the need arise. The
control valve is located at the base of the fire as shown below in figure
2.
Fig. 2
5.4.2 Ensure that the power isolation switch is in position "1" and the power
indicator light is illuminated (red) as shown in figure 3 below.
Fig. 3
Battery compartment
cover opening lever
Power isolation switch
Power button
Battery
compartment
cover
38
Indicator light
Decrease
flame
Increase flame