Sam4s SPS-500 SERIES Service Manual page 73

3 Installation and Operation
3-13 Installation
3-13-10 Uninstallation of Memory Card
Caution :
· Before installation, be sure to turn off the power switch.
· Use gloves to protect your hand from being cut by the angle and the chassis.
· Connect all the cables correctly. When connecting or disconnecting the cables, be careful not to apply
stress to the cables. (It may cause disconnection)
· Be careful not to bind interface cables and AC power cord together.
※ Warning.
Turn off the system mains power before attempting to uninstall Memory Card.
If Memory Card is uninstalled while power is on, the system will seriously be damaged.
1. Unscrew Memory Card Cover by using a (+) shaped screw driver, Figure 3-9.
3-50
Figure 3-9 Memory Card Uninstallation (1)
SAM4S SPS-500 Series