Sam4s SPS-500 SERIES Service Manual page 14

2 Product Specifications
2-3 Thermal Printer Specifications
2-3-2 Paper Specification
Item
Paper Type
Paper Size
Specified Paper
Note: The following paper can be used instead of the specified paper above.
TF50KS-E: Nippon paper industries Co.,Ltd.
PD 160R : New Oji paper Mfg, Co.,Ltd.
F380 : Kansaki specialty papers, Inc. (USA)
2-3-3 Printable Area
The Printable area of a paper with width of 79.5mm is 72.0mm(576 dots) and the space on the right and left
sides are approximately 4.0mm.
d
2-3-4 Character Specification
Item
Character Structure
Character Size
Column Pitch
Line Pitch
Number of Column
2-8
 Single-ply Thermal Paper Roll
 79.5 mm±0.5 mm (Width) ×80 mm or less
 Original Paper No : HPK-110 (Hansol paper XT)
Table2-7 Paper Specification (SPS-530)
a
b
c
Figure2-6 Printable Area (SPS-530)
 12(W) × 24(H) Font (Including a Horizontal)
 1.25 mm(W) ×3.0 mm(H)
 1.5 mm
 3.75 mm (Including 6-dot Line Spacing)
 32 (12×24 Dots/Character)
Table2-8 Character Specification (SPS-530)
Description
a = 79.5±0.5 mm (Paper Width)
b = 0.141 mm (1 Dot)
c = 72.0 mm(576 Dots/Printable Area)
d = 4.0 mm (Left Space)
e = 4.0 mm (Right Space)
e
Description
Remark
Remark
SAM4S SPS-500 SERIES