Seagull Models SEA53A_1 YAK 54 Assembly Manual page 14

YAK 54.
RUDDER PULL - PULL CABLE SYSTEM.
See pictures below:
! 1) Insert servo arm into servo.
! 2) With the radio on, check the operation
of the rudder. Adjust the cables so when the
rudder servo is centered, the rudder is
centered as well. There will be tension on the
cables. Adjustments can be made at the rudder
control horn and at the servo arm. Once
adjustments are made, secure the servo arm
to the rudder arm servo using the screw that
came with the servo
Cable.
14
M3 lock nut.
Left side.
Instruction Manual.
Control horn.
Metal clevis.
WHEEL AND WHEEL PANTS.
! 1) Assemble and mounting the wheel pants
as shown in the following pictures.
! 2) Follow diagram below for wheel pant
installation:
Pushrod.
Cable.