Seagull Models SEA53A_1 YAK 54 Assembly Manual page 21

www.seagullmodels.com
Antenna wire.
Throttle.
Antenna.
ATTACHMENT WING-FUSELAGE.
Attach the aluminium tube into fuselage.
INSTALLING THE BATTERY-RECEIVER.
! 1) Plug the six servo leads and the switch
lead into the receiver. Plug the battery pack
lead into the switch also.
!
2) Wrap the receiver and battery pack in
the protective foam rubber to protect them
from vibration.
! 3) Route the antenna in the antenna tube
inside the fuselage and secure it to the bot- Insert two wing panels as pictures below:
tom of fuselage using a plastic tape. See pic-
ture below.
Tie wrap.
Receiver.
21