Seagull Models SEA53A_1 YAK 54 Assembly Manual page 17

www.seagullmodels.com
Mark point.
Paper tape guide.
Pushrod wire.
Engine 1.25 - 4 stroke.
1mm drill bit.
Paper tape guide.
4x30mm.
Pushrod wire.
Mark point.
COWLING.
Trim and cut.
! 1) Slide the fiberglass cowl over the en-
gine and line up the back edge of the cowl with
the marks you made on the fuselage then trim
and cut.
Paper tape guide.
Trim and cut.
17