Features - KTI Networks KGS-1060 User Manual

1.1 Features

 Eight 10/100/1000Mbps RJ-45 and two dual-speed SFP slots
 All copper ports support auto-negotiation and auto-MDI/MDI-X detection.
 Two SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers.
 Full wire speed forwarding
 Supports 802.3x flow control for full-duplex and backpressure for half-duplex
 Port link aggregation function with LACP support
 Supports SFP with Digital Diagnostic Monitoring (DDM)
 Alternatively powered via PoE if direct DC power not available
 Optional four 802.3at-compliant PoE+ PSE ports
 SNMP private MIB for DDM status, reboot, TFTP firmware update (MIB file Rev1.05 or up)
 Optical Power Alarm (OPA) function
 Auto Laser Shutdown (ALS) function (supported in H/W Ver.E up)
 Management:
- HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
- DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4
- IPv6 support, System Syslog, Configuration down/upload, Software upload
 Security:
- NAS, 802.1X, MAC-based/Web/CLI authentication
- IP MAC binding, TACACS+, IP source guard
 Layer 2:
- QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
- Storm control for UC/MC/BC packets, Static MAC configuration
- IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
- Multiple Spanning Tree - MSTP. RSTP, STP
 Auto Multi-Ring (KAMR) Technology:
- Fast failover response time, Auto recovery when failure is repaired
- Supports up to five redundant rings, Works with RSTP network
-6-