Applying Power - KTI Networks KGS-1060 User Manual

2.5 Applying Power

Pin Assignments of the terminal block connector




AR+
AR
Any of the Vdc+/Vdc- pairs can be used to receive DC power from an external power system. Or, one can be
used to deliver the power received on another to next switch in cascading way.
Vdc Input specifications
Applications
General
PoE
High power PoE (PoE+)
WARNING: The -48VDC power supply is not supported.
Three 2P terminal plugs are provided together with the switch. Two of the three plugs are used for Vdc
interfaces respectively. The plug is shown below:

Vdc Positive ( ) input terminal

Vdc Negative ( ) input terminal

Vdc Positive ( ) input terminal

Vdc Negative ( ) input terminal
Alarm relay output positive () terminal
Alarm relay output negative (
Power per PSE port
-
15.4W max.
35W max.

) terminal
DC working voltage
+7V ~ +60VDC
+45V ~ +57VDC (Typical 48V)
+45V ~ +57VDC (+52V up for 35W)
-16-