Features - KTI Networks KGS-1064-BP User Manual

1.1 Features

⚫ Eight 10/100/1000Mbps RJ-45 and two dual-speed SFP slots
⚫ All copper ports support auto-negotiation and auto-MDI/MDI-X detection.
⚫ All copper ports are equipped with 802.3bt-compliant PoE PSE function
⚫ Two SFP slots support dual speed for 100BASE-FX and 1000BASE-X SFP transceivers.
⚫ Full wire speed forwarding
⚫ Supports 802.3x flow control for full-duplex and backpressure for half-duplex
⚫ Supports SFP with Digital Diagnostic Monitoring (DDM)
⚫ Provides PoE PSE redundancy function
⚫ Provides fiber Optical Power Alarm (OPA) function
⚫ Provides Automatic Laser Shutdown (ALS) function
⚫ Management:
- HTTP/HTTPS/SSHv2/CLI telnet/CLI console/SNMP v1/v2c/v3/RMON
- DHCP/DHCPv6 client, DHCP relay, DNS client, NTPv4
- IPv6 support, System Syslog, Configuration down/upload, Software upload
⚫ Security:
- NAS, 802.1X, MAC-based/Web/CLI authentication
- IP MAC binding, TACACS+, IP source guard
⚫ Layer 2:
- QoS, 802.1Q/MAC-based/Protocol-based/Private/IP subnet VLAN, Port Isolation
- Storm control for UC/MC/BC packets, Static MAC configuration
- IGMP v2/v3 snooping, MLD v1/v2 snooping, DHCP snooping
- Multiple Spanning Tree - MSTP. RSTP, STP
⚫ Auto Multi-Ring (KAMR) Technology:
- Fast failover response time
- Auto recovery when failure is repaired
- Supports up to five redundant rings
- Works with RSTP network
⚫ Specific SNMP implementation:
- Private MIB for reading DDM status
- Private MIB for remote boot the device over SNMP
- Private MIB for TFTP firmware update over SNMP
- Private MIB for configuring OPA function
- Private MIB for configuring ALS function
- OPA alarm traps
-6-