Service Overview - ZyXEL Communications ZyWall USG20-VPN User Manual

Figure 331 IPv4/IPv6 Address Group Configuration > Add
The following table describes the labels in this screen.
Table 202 IPv4/IPv6 Address Group Configuration > Add
LABEL
Name
Description
Member List
OK
Cancel

29.6 Service Overview

Use service objects to define TCP applications, UDP applications, and ICMP messages. You can also
create service groups to refer to multiple service objects in other features.
• Use the Service screens
services and their definitions.
• Use the Service Group screens
list of service groups.
Chapter 29 Object
DESCRIPTION
Enter a name for the address group. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
This field displays the description of each address group, if any. You can use up to 60
characters, punctuation marks, and spaces.
The Member list displays the names of the address and address group objects that have
been added to the address group. The order of members is not important.
Select items from the Available list that you want to be members and move them to the
Member list. You can double-click a single entry to move it or use the [Shift] or [Ctrl] key
to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
Click OK to save your changes back to the USG.
Click Cancel to exit this screen without saving your changes.
(Section 29.6.2 on page
(Section 29.6.2 on page
USG20(W)-VPN Series User's Guide
493) to view and configure the USG's list of
493) to view and configure the USG's
492