Zyxel One Network (Zon) System Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

The following table describes the fields in the ZON Utility main screen.
Table 255 ZON Utility Fields
LABEL
Type
Model
Firmware Version
MAC Address
IP Address
System Name
Location
Status

30.16.1 ZyXEL One Network (ZON) System Screen

Enable ZDP (ZON) and Smart Connect (Ethernet Neighbor) in the System > ZON screen.
See Monitor > System Status > Ethernet Neighbor for information on using Smart Connect
(Link Layer Discovery Protocol (LLDP)) for discovering and configuring LLDP-aware devices in the
same broadcast domain as the USG that you're logged into using the web configurator.
The following figure shows the System > ZON screen.
Figure 417 Configuration > System > ZON
The following table describes the labels in this screen.
Table 256 Configuration > System > ZON
LABEL
ZDP
Enable
Smart Connect
Enable
Chapter 30 System
DESCRIPTION
This field displays an icon of the kind of device discovered.
This field displays the model name of the discovered device.
This field displays the firmware version of the discovered device.
This field displays the MAC address of the discovered device.
This field displays the IP address of an internal interface on the discovered device
that first received an ZDP discovery request from the ZON utility.
This field displays the system name of the discovered device.
This field displays where the discovered device is.
This field displays whether changes to the discovered device have been done
successfully. As the USG does not support IP Configuration, Renew IP address
and Flash Locator LED, this field displays "Update failed", "Not support Renew IP
address" and "Not support Flash Locator LED" respectively.
DESCRIPTION
ZyXEL Discovery Protocol (ZDP) is the protocol that the ZyXEL One Network (ZON)
utility uses for discovering and configuring ZDP-aware ZyXEL devices in the same
broadcast domain as the computer on which ZON is installed.
Select to activate ZDP discovery on the USG.
Smart Connect uses Link Layer Discovery Protocol (LLDP) for discovering and
configuring LLDP-aware devices in the same broadcast domain as the USG that
you're logged into using the web configurator.
Select to activate LLDP discovery on the USG. See also Monitor > System Status >
Ethernet Discovery.
USG20(W)-VPN Series User's Guide
588