15.4.2 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the USG.
Make sure the computer is connected to a LAN port of the USG. Turn on your computer and the
USG.
15.4.2.1 Auto-discover Your UPnP-enabled Network Device
Click start and Control Panel. Double-click Network Connections. An icon displays under
1
Internet Gateway.
Right-click the icon and select Properties.
2
Figure 182 Network Connections
In the Internet Connection Properties window, click Settings to see the port mappings there
3
were automatically created.
Figure 183 Internet Connection Properties
You may edit or delete the port mappings or click Add to manually add port mappings.
4
Chapter 15 UPnP
USG20(W)-VPN Series User's Guide
278