Figure 35 Wall Mounting
3.2 Default Zones, Interfaces, and Ports
The default configurations for zones, interfaces, and ports are as follows. References to interfaces
may be generic rather than the specific name used in your model. For example, this guide may use
"the WAN interface" rather than "wan1" or "wan2".
The following table shows the default physical port and interface mapping for each model at the
time of writing.
Table 12 Default Physical Port - Interface Mapping
PORT / INTERFACE
•
USG20-VPN
•
USG20W-VPN
Chapter 3 Hardware, Interfaces and Zones
P1
P2
P3
sfp
wan
lan1
sfp
wan
lan1
USG20(W)-VPN Series User's Guide
48
Screw Specifications
P4
P5
P6
lan1
lan1
lan1
lan1
lan1
lan1