Extension Slot Screen; Interface Status Summary Screen - ZyXEL Communications ZyWall USG20-VPN User Manual

5.2.10 Extension Slot Screen

Figure 81 Dashboard > Extension Slot
This table describes the fields in the above screen.
Table 26 Dashboard > Extension Slot
LABEL
#
Extension Slot
Device
Status

5.2.11 Interface Status Summary Screen

Interfaces per USG model vary.
Figure 82 Dashboard > Interface Status Summary
Chapter 5 Dashboard
DESCRIPTION
This field displays the name of each extension slot.
This field displays the name of the device connected to the extension slot (or
none if no device is detected). For an installed SEM (Security Extension Module)
card, this field displays what kind of SEM card is installed.
SEM-VPN - The VPN accelerator. The SEM-VPN provides 500 Mbps VPN
throughput, 2,000 IPSec VPN tunnels, and 750 SSL VPN users.
SEM-DUAL - accelerator for both VPN and UTM. The SEM-DUAL provides the
benefits of the SEM-VPN.
USB Flash Drive - Indicates a connected USB storage device and the drive's
storage capacity.
The status for an installed WLAN card is none. For cellular (mobile broadband)
interfaces, see Section 6.10 on page 113
installed SEM (Security Extension Module) card, this field displays one of the
following:
Active - The SEM card is working properly.
Ready to activate - The SEM was inserted while the USG was operating.
Restart the USG to use the SEM.
Driver load failed - An error occurred during the USG's attempt to activate the
SEM card. Make sure the SEM is installed properly and the thumbscrews are
tightened. If this status still displays, contact your vendor.
Ready - A USB storage device connected to the USG is ready for the USG to use.
Unused - The USG is unable to mount a USB storage device connected to the
USG.
USG20(W)-VPN Series User's Guide
94
for the status that can appear. For an