Arctic Cat 2014 SNO PRO 500 Operator's Manual page 85

Axle Nut Spanner Wrench
p/n: 0644-558
Usage: Adjust track alignment/tension (2010-2013 Sno
Pro 500 and Sno Pro 600).
Rear Suspension Spring Tool
p/n: 0144-311
Usage: Install/remove rear suspension springs.
Hex Bits (1/4 in. Hex Drive)
p/n: 0644-317 (5 mm)
p/n: 0644-316 (6 mm)
Usage: With Quick-Disconnect Coupler (p/n 0644-308),
remove and install bolts and screws.
Insert Holder (5/16 in.)
p/n: 0644-315
Usage: With Torx Bit Insert (p/n 0644-314), remove and
install torx-head screws.
0644-558
Phillips-Head Bits (1/4 in. Hex Drive)
p/n: 0644-319 (#2)
p/n: 0644-318 (#3)
Usage: With Quick-Disconnect Coupler (p/n 0644-308),
remove and install Phillips-head screws.
0144-311
Quick-Disconnect Coupler
p/n: 0644-308
Usage: Hold 1/4 in. hex drive Torx Bits (page 83), Hex
Bits (page 81), and Phillips-Head Bits (page 81).
0644-316
0644-315
0644-318
0644-308
81