Arctic Cat 2014 SNO PRO 500 Operator's Manual page 80

V Blocks
p/n: 0644-535
Usage: Check crankshaft runout.
Water Pump Bearing and Seal Tool Kit
p/n: 0644-557
Usage: Remove/install crankcase water pump bearings
and seals.
Compression Tester Kit
p/n: 0444-213 (Complete Kit)
p/n: 0444-207 (10 mm Adapter)
p/n: 0444-093 (12 mm Adapter)
Usage: Test cylinder compression on all Arctic Cat
engines.
76
Engine Timing Gauge
p/n: 0144-009
Usage: Static time engines without CDI ignition.
0644-535
Timing Light
p/n: 0644-296
Usage: Check ignition timing.
90° Hex Driver (1/4-in.)
0644-557
p/n: 0644-550
Usage: Make carburetor adjustments on all twin and tri-
ple cylinder engines. Also, for any hard-to-get-at hex nuts.
(A. 6 mm Hex)
(B. 0.157-in. D-Head)
(C. 1/4-in. Drive)
(D. Straight Blade)
(E. Phillips-Head)
0444-213
0144-009
0644-296
0644-550