Arctic Cat 2014 SNO PRO 500 Operator's Manual page 82

Drive Clutch Bolt Tool (Torx #60)
p/n: 0644-281
Usage: Remove/install drive clutch bolt.
Spider Removal Kit
p/n: 0644-449 (Complete Kit)
p/n: 0744-037 (Handle)
p/n: 0744-036 (Removal Tool)
p/n: 0644-380 (Clutch Holder - 33 mm)
p/n: 0744-035 (Clutch Holder - 30 mm)
p/n: 0644-138 (Thin Wall Deep Socket - 1 7/16 in.)
Usage: Disassemble/assemble/remove spider on Arctic
drive clutches.
Track Clip Installation Tool
p/n: 0644-194
Usage: Install track clips on Camoplast and Yokohama
rubber tracks.
78
Track Stud Hole Drill (7 mm)
p/n: 1639-629
Usage: Drill 7 mm hole through rubber tracks for install-
ing studs.
0644-281
Throttle Position Sensor (TPS) Adjustment
Tool Kit
p/n: 3639-891 (Complete Set)
p/n: 1686-436 (Harness Only)
p/n: 0644-359 (Torx-Head Screwdriver - #25 Only)
p/n: 0644-344 (Torx-Head Screwdriver - #30 Only)
p/n: 0644-345 (Pin Gauge Only)
Usage: Precisely adjust the throttle position sensor on
carbureted and EFI models.
0644-449
0644-194
1639-629
3639-891