Arctic Cat 2014 SNO PRO 500 Operator's Manual page 81

Bearing Cap Seal Protector
p/n: 0644-268
p/n: 0644-403 (1/2 in. O.D. x 3/8 in. I.D.)
p/n: 0644-404 (5/8 in. O.D. x 3/8 in. I.D.)
p/n: 0644-542 (5/8 in. O.D. x 1/2 in. I.D.)
Usage: Protect cap seal on rebuildable shock absorbers.
Clutch Compressor
p/n: 0644-420
Usage: Compress and hold drive clutch in the com-
pressed position for changing cam arms and removing/
installing six-post drive clutch.
Clutch Puller (Arctic)
p/n: 0744-062
Usage: Remove drive clutch from the crankshaft on
2010-2013 models.
Drive Belt Deflection Tool
p/n: 0644-424
Usage: Adjust driven clutch for proper drive belt deflec-
tion and aid in drive belt removal on Sno Pro 600 model
with Team Industries driven clutch.
Drive Clutch Spanner Wrench
0644-404
p/n: 0644-136
Usage: Hold Comet and Arctic round-shaft drive clutch in
place during removal and installation.
Driven Clutch Compressor Tool
0644-420
p/n: 0644-444
p/n: 0643-095 (A. Disc Only)
Usage: Disassemble/assemble Arctic ACT and Team
Industries driven clutches.
0644-207
0644-424
0644-136
0644-444
77