Lamp Replacement And Adjustment - Martin Mania EFX500 User Manual

Cleaning optical componen ts
Use care when cleaning
optical components. The
coated surfaces are fragile
and even small scratches
may be visible in the
fixture's light output.
1. Disconnect the fixture
from power and allow it to
cool for at least 10
minutes.
2. Open the covers as
described in "Cleaning
the fan and air vents"
above.
3. Blow or vacuum away
loose dust. Remove dirt
from lenses, gobos and
mirror wheel with a soft
cloth or cotton swabs
wetted with isopropyl alcohol. Regular glass cleaner may also be used,
but no residues may remain. To avoid scratches, do not rub. Instead,
press repeatedly to lift dirt off surfaces.
4. Any remaining residues or streaking can be removed with distilled
water. Mixing the water with a small amount of wetting agent such as
Kodak Photoflo will help prevent streaking and spotting.
5. Dry with a clean, soft, lint-free cloth or compressed air.
6. Reinstall all covers before reapplying power.
L a m p r e p l a c e m e n t a n d
a d j u s t m e n t
Warning! Wear safety glasses and gloves and allow the fixture to cool
for at least 10 minutes before replacing lamps.
Mania EFX500 lamp
The Mania EFX500 uses a 250 W halogen lamp. Replace the lamp when
it reaches the average life specified by the manufacturer.
Service and maintenance
EFX600
EFX500
Optical path
23