E r r o r m e s s a g e s
7 0 1
In the event of a gobo wheel error, the message
will appear in the
fixture's display. If an error message is displayed, try powering the fixture
off and then on again to reset it.
If the problem persists, contact your Martin dealer.
S t r i k i n g t h e E F X 6 0 0 l a m p
If the EFX600's discharge lamp is powered off via DMX during operation,
you must wait eight minutes before the lamp can be restruck.
7 02
If you try to strike the lamp anyway, the message
will appear in the
display.
A d j u s t i n g f o c u s
Focus can be adjusted from
approx. 2 meters (6.6 ft.) to
approx. 20 meters (66 ft.).
The focus adjustment knob
is close to the lens aperture
in the mirror drum cutout
(see illustration on right).
Operation
21