Table of Contents
Advertisement
PLC Wireless Router
Troubleshooting
Why all the LED indicators are off?
• Check the connection between the power adapter and power socket.
• Check whether the device is turned on.
Why the Ethernet indicator is off?
• Check the connection between your PLC wireless router and the computer, hub, or
switch.
• Check the running status of your computer, hub or switch, and verify whether they run
normally or not.
• Check the network cable that is connected to the PLC wireless router and other
devices.
Why you fail to access the Web page?
Follow the steps below to check the connection between the computer and the device:
• Click start > Run and enter ping command ping 192.168.1.1 (the IP address of PLC
wireless router).
• If you fail to access the PLC wireless router, check the following settings:
The network cable type
The connection between your router and the computer
TCP/IP settings of PC
How to restore factory defaults after carrying out the incorrect configuration?
• Press the Reset pushbutton for 3 seconds and then release it. The PLC wireless router
restores the factory default settings.
• The default IP address of the PLC wireless router is 192.168.1.1 and the subnet mask
is 255.255.255.0.
• The user name and password of the super user are both admin.
• The user name and password of the common user are both user.
- 83 -
F@st Plug 502W
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the F@st Plug 502W and is the answer not in the manual?
Questions and answers