Dhcp - SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W

DHCP

If you select DHCP, the PLC wireless router automatically obtains the IP address, subnet
mask, and IP address of the gateway from the ISP. If the ISP does not provide any IP
network parameters, please select this mode.
See the following figure:
The following table describes parameters in this page:
Field
Enable WAN
Connection Type
Service Type
Hostname
Vendor Class ID
MTU
Domain Name Server
Assignment
Description
Enable or disable the WAN connection of DHCP type.
Select DHCP from the drop-down list.
INTERNET: It is mainly used for the Internet service, for
example, surfing the Internet.
TR069 type: It is mainly used for the TR069 service, for
example, TR069 remote management.
TR069_INTERNET: a mixed type, which applies to both the
Internet and TR069 services.
Set the host name of local computer.
Enter the vendor class ID. DHCP server assigns the IP
address to your router according to the vendor class ID.
Set the maximum transmission unit. It is 1500 bytes for most
Ethernet networks. But some ISPs may require smaller
MTUs. Do not modify the value of MTU size unless it is
necessary for your ISP connection.
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to your
router.
- 30 -
PLC Wireless Router