Dhcp Filtering - SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W
Click Add to display the following page.
The following table describes parameters in this page:
Field
MAC
Comment
After setting the parameters, click Apply to save the settings.

DHCP Filtering

DHCP filtering realizes network access control based on the IP addresses of network
devices.
Click ADVANCED > Access Control > DHCP Filtering, and the following page appears.
Description
Enter the MAC address of the device that is not allowed to
access the Internet.
Enter the comment about the MAC filtering rule.
- 48 -
PLC Wireless Router