Pppoe - SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router

PPPoE

If the ISP provides the user name and password for PPPoE dialup, please select PPPoE.
The following table describes parameters in this page:
Field
Enable WAN
Connection Type
Service Type
PPPoE Account
PPPoE Password
Confirm Password
Authentication Method
MTU
Domain Name Server
Assignment
Description
Enable or disable the WAN connection of PPPoE type.
Select PPPoE from the drop-down list.
INTERNET: it is mainly used for the Internet service, for
example, surfing the Internet.
TR069: It is mainly used for the TR069 service, for example,
TR069 remote management.
TR069_INTERNET: It is a mixed type, which applies to both
the Internet and TR069 services.
Enter the user name provided by the ISP for PPPoE dialup.
Enter the password provided by the ISP for PPPoE dialup.
Enter the PPPoE password again.
You can select AUTO, PAP, CHAP, MS-CHAP, or EAP from
the drop-down list.
Set the maximum transmission unit. It is 1500 bytes for most
Ethernet networks, 1492 bytes for PPPoE connection. But
some ISPs may require smaller MTUs. Do not modify the
value of MTU size unless it is necessary for your ISP
connection.
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to your
router.
- 33 -
F@st Plug 502W