Wireless Setup; Wireless Basic Settings - SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router

Wireless Setup

Choose SETUP > Wireless Setup, and the following page appears.

Wireless Basic Settings

Choose Wirelss Setup > Wireless Basic on the left pane or click Wireless Basic in the
WIRELESS SETUP page to display the following page.
In this page, you can configure the basic wireless parameters.
The following table describes parameters in this page:
Field
Enable
Interface
Wireless Network Name
(SSID)
Visibility Status
Region
Description
Wireless
Enable or disable the wireless interface.
The wireless network name (SSID) can contain up to 32
characters and can be letters, numerals, underlines, and any
combinations of them. The SSID is case-sensitive.
If Visible is selected, the PLC wireless router broadcasts its
SSID on the wireless network.
If Invisible is selected, the PLC wireless router does not
broadcast its SSID on the wireless network.
Select the country where you are from the drop-down list.
- 35 -
F@st Plug 502W