Interface Description - SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W
The following table describes pushbuttons on the front panel:
Button
Security
Reset
WPS

Interface Description

The following table describes interfaces on the PLC wireless router:
Interface
1
2
off / on
It is used to set the status of the device members.
Press and hold the Security pushbutton for more than 10 seconds to
exit the current network and generate a random password of network
member.
Press and hold the Security pushbutton for less than 3 seconds, and
then the PLC wireless router becomes a member of the existing
AVLN.
Press the Reset pushbutton for more than 3 seconds and then
release it. System restores the factory default settings.
It has the following functions:
Press the WPS pushbutton for less than 3 seconds to enable the
negotiation of PBC mode.
Press the WPS pushbutton for more than 5 seconds to enable or
disable WLAN.
1
Description
RJ45 LAN interface, for connecting a hub, switch, or computer on a
LAN
RJ45 LAN interface, for connecting a hub, switch, or computer on a
LAN or WAN over Ethernet interface
Power switch
Description
2
off / on
- 10 -
PLC Wireless Router