Access Control; Mac Filter - SAGEMCOM F@st Plug 502W User Manual

PLC Wireless Router F@st Plug 502W

Access Control

Choose ADVANCED > Access Control, and the following page appears.

MAC Filter

MAC (Media Access Control) address filter is used to filter the transmission data according to
the physical address of wireless network card. In this page, you can add the MAC addresses
of devices to the MAC filtering list. The devices in the MAC filtering list are not allowed to
access the Internet.
Click ADVANCED > Access Control > MAC Filter to enter the MAC Filtering page, and then
check Enable MAC Filtering, and the following page appears.
- 47 -