Wpa-Psk - SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W
The following table describes parameters related to the WEP mode:
Field
WEP Key Length
Default Tx Key
WEP Key Format
WEP Key 1/2/3/4
Authentication

WPA-PSK

Select WPA-PSK from the drop-down list of wireless security mode to display the following
page.
The following table describes parameters related to the WPA mode:
Field
WPA Mode
Encryption Mode
Group Key
Interval
Pre-shared Key
Description
Select the encryption length of WEP key. You can select 64
bit or 128 bit.
Select one from the four keys as the default key of the
wireless network.
When the key format is 64 bit, you need to enter 5 ASCII
characters or 10 hexadecimal digits.
When the key format is 128 bit, you need to enter 13 ASCII
characters or 26 hexadecimal digits.
Set 64-bit or 128-bit key according to the key format.
Select the proper authentication mode. You can select Open
or Share Key.
Description
Only WPA-Personal is available.
Only TKIP is available.
Update
Set the update interval of group key.
Set the pre-shared key. The PLC wireless router uses this
key to authenticate the identity of workstation.
- 38 -
PLC Wireless Router