Http Upgrade Mode - SAGEMCOM F@st Plug 502W User Manual

F@st Plug 502W
The following table describes parameters in this page:
Field
Firmware Version
Upgrade Mode
Server IP Address
Server Port
User Name
Password
Directory
Clear Config

HTTP Upgrade Mode

If you select HTTP from the drop-down list of upgrade mode, the following page appears.
The following table describes parameters in this page:
Field
Firmware Version
Upgrade Mode
Server IP Address
Server Port
User Name
Password
Directory
Clear Config
Description
Display current firmware version.
Select FTP.
Enter the IP address of FTP server.
Enter the port number of FTP server.
Enter the username for connecting to the FTP server.
Enter the password for connecting to the FTP server.
Enter the firmware directory.
If you check Clear Config, the PLC router restores to the
default settings after upgrade. Otherwise, the PLC router
keeps the current settings.
Description
Display current firmware version.
Select HTTP.
Enter the IP address of HTTP server.
Enter the port number of HTTP server.
Enter the username for connecting to the HTTP server.
Enter the password for connecting to the HTTP server.
Enter the firmware directory.
If you check Clear Config, the PLC router restores to the
default settings after upgrade. Otherwise, the PLC router
keeps the current settings.
- 68 -
PLC Wireless Router