Beta 2008 URBAN 125cc Service Manual page 140

5
A
B
D
GB
REPLACING THE BRAKE PADS
The procedure for replacing the brake
pads is provided only for information. We
recommend having the operation per-
formed by a BETAMOTOR authorized
workshop.
Front brake
B
To replace the front pads, proceed as
follows:
• Loosen the two screws A and remove
the brake caliper.
• Unscrew
Note: Screws B are secured very tightly
and should be loosened before remov-
ing the caliper from the fork.
•Extract the brake pads.
•To refit the parts, follow the reverse pro-
cedure.
Ensure that the spring D shown in the fig-
ure is properly seated by checking that it
offers some resistance to the insertion of
the brake pads.
To avoid braking problems, take special
care in ensuring that the screws are refit-
ted properly.
Whenever the brake disc is removed,
apply Loctite to the screws when refitting
C
Note: When removing the brake
caliper, take care not to damage reed
C, as it is extremely fragile.
66
the two screws B.