Beta 2008 URBAN 125cc Service Manual page 128

3
How to remove the plate holder
To remove the back plate holder A
including the lights and indicators, first
remove the saddle (see previous page),
then:
•loosen the three screws and the fixing
nuts B of the back plate holder.
•disconnect the electric connections of the
back lights and remove the plate holder A.
WARNING:
The motorbike cannot be driven
without a plate holder and/or lights. It
can only be driven in private tracks and/
or traffic-barred areas.
Removing
the front mudguard
Remove the front mudguard by unscrewing
the 4 fixing screw C.
Removing the stand
•Remove the fixing system D (screw and
nut).
•Pull out the stand E while taking care
not to lose the draw spring F.
Notes:
while disassembling the motorbike, take
care not to damage the magnet and the
stand sensor G.
Removing the passenger' s footrests
• Loosen the two screws Hshown in the fig-
ure and remove the passenger's footrest
complete with the frame fixing support.
How to remove the helmet lock
To remove the helmet lock, just remove
the two screws I.
GB
B
G
E
I
54
A
C
D
F
H