Beta 2008 URBAN 125cc Service Manual page 111

RECOMMENDED LUBRICANTS AND FLUIDS
To maximize the vehicle's performance and ensure many years of trouble-free opera-
tion, we recommend using the following products:
PRODUCT TYPE
ENGINE OIL
BRAKE OIL
FORK OIL
TIE ROD GREASE
Note
It is essential that all renewals should be performed with the products listed in de
table above (see pag. 57).
RUNNING-IN
The running-in period lasts approximately 10 hours, during which it is advisable to:
• Warm up the engine well before starting off.
• Avoid riding at constant speed (changing the speed allows the different compo-
nents to bed in uniformly and in a shorter time).
• Avoid turning the throttle twist grip more than 3/4 of its travel.
WARNING
• After the first 1000 km renew the engine oil.
• Always use high-octane unleaded petrol.
• After using the vehicle on rough ground for the first time, carefully check the tighten-
ing of all nuts and bolts.
SPECIFICATIONS
BARDAHL XTM 15W 50
BARDAHL BRAKE FLUID DOT4
SHELL EBH 16
BARDAHL Outboard Grease NLGI2
37
2
GB