Beta 2008 URBAN 125cc Service Manual page 126

3
HOW TO REMOVE BODY PARTS
B
Some parts of the body may have to be
removed for easier inspections or main-
tenance.
A
WARNING:
If these parts are improperly reassembled,
they might suddenly come off while driv-
ing, and the driver might lose control of
the motorbike.
How to remove the saddle
C
To remove the saddle, just remove the
two screws A, the clamp B and the clamp
C underneath the saddle.
D
Note:
When removing the saddle the fender
will come off too.
To separate the two parts, remove the
three screws D.
E
How to remove the tank covers
To remove the tank covers E, proceed as
follows:
F
• Loosen the screws F on the tank.
• Loosen the two clamps G, in the front
of the motorbike.
• Remove the tank cover E.
G
GB
52