Charging The Mc35 - Symbol MC3504 User Manual

Charging the MC35

For initial use, you need to charge your device for about four hours. After that, charge it
everyday to recharge the battery to full capacity. Charge your device using the USB sync
cable, see instructions below.
To charge your device:
1 Install the replaceable clip plug to the AC adapter.
Slide the clip plug into the clip plug holder on the adapter, then snap into place. The
clip plug locks to the clip plug holder with an audible click.
2 Plug the AC adapter cable into the connector on bottom of the device.
3 Connect the AC adapter power cable into an electrical outlet.
The LED indicator on the front panel light orange when AC connection is made.
LED status during charging:
• Flashing orange: Charging
• Solid orange: Charging complete
If the battery level becomes low in the course of normal use, a status icon appears on the
device screen indicating low or very low battery status (see "Status icons" on page 23).
In both cases, perform an ActiveSync operation to back up your data, then recharge your
device as soon as possible.
If the battery level reaches low status, the device enters sleep mode; if the battery level
reaches very low status, the device enters deep sleep mode. In this case, you have about
72 hours to recharge your device after which you risk losing all data on your device's
internal memory.
For information on how to wake up your device from sleep mode, refer to page 188.
1 F i r s t T h i n g s F i r s t
Preparing to use your MC35
3