Call Waiting - Toshiba IP EDGE Description

station using the Directed Call Pickup feature or a station that has a DN appearance of the
"transferred to" DN. A flashing red LED indicates the call is transferred. Privacy for trans-
ferred calls can be disabled in programming.
Transfer (Screened)
The transferring party can talk privately with the receiving party before connecting the
party to be transferred. While that conversation is going on, the transferred party is on
Consultation Hold listening to Music-on-hold. When the receiving party agrees to accept
the call, the transferring party can use the switch hook or feature button to include the
original party in the conversation. At this point, the transferring party can hang up and the
other two parties remain connected.
Transfer (Unscreened)
Unscreened Transfer allows the transferring party to exit the connection before the trans-
fer destination answers. After the destination answers the call, the system treats it as a reg-
ular call. If the destination does not answer the call within the predetermined time period,
the transferring party is recalled.
Transfer to Voice Mail
The transferring party can transfer a call directly to a person's voice mailbox without wait-
ing for the call to forward from the called party's telephone. The voice mailbox does not
need to be associated with an active telephone in the IPedge Net system. Direct transfer to
voice mail (VM) can be performed to a centralized VM system connected to a network
node other than the user's node.
The transferring party presses
the call transfers immediately on receipt of the last digit. The transferred party hears the
greeting associated with the specified mailbox and can then leave a message.
Direct Transfer to Voice Mailbox simplifies getting a call for a busy or absent employee to
his/her mailbox. It eliminates the need for the caller to enter the desired mailbox number
after being connected to the voice mail system. This feature is available using standard
DTMF VM integration and does not require Toshiba proprietary VM integration.

Call Waiting

When a station is busy with a call and another call is directed to that station's busy
DN button, two short beeps are issued to alert the telephone user of the pending call.
Call Waiting works for calls originating from within or outside the system. The length of
the Call Waiting beeps is different for internal and external Call Waiting. The different
beeps distinguish which type of call is waiting.
IPedge General Description
Direct Transfer to VM
04/13
and dials the mailbox number, and
Features
Call Waiting
or
Line
59